Edge preparation for welding with the use of bevel heads

Welding is and remains a professional’s job. Not everybody can create a nice, good and strong weld just like that. In order to deliver the best result, it is important to have the best working conditions and the best tools.

This is how easy it is to make a beveled edge on metal

The benefits of working with Beveltools

Consistent and accurate angle

Chamfering metal with Beveltools bevel heads provides a consistent and accurate angle on sheet material or the outside/inner diameter of pipes. Making a bevel with grinding discs takes too much time and the results are not always as perfect as you would like. The bevel cutters from Beveltools make a smooth beveled edge in one pass. Optimal weld preperation results in a stronger weld.

No finishing and no discoloration

Use of a cutting torch often requires finishing before one can proceed with the welding and the heat causes discoloration of the material. Beveltools guarantees reduced-sparking machining, with hardly any heat being added to the material. With these bevel heads there's no need for finishing. 

Superior quality without contamination

In contrast to the current beveling methods (with a cutting torch, flap disc or grinding disc), working with Beveltools does not add any contamination to the metal. A better welded joint is created through reduced encapsulation in the weld, as the machines do not contaminate the metal.

Lightweight beveling machines

The portable beveling machines are compact and light. They can be brought to the metal without much physical effort and can be used in areas with limited space. The machine is set within a few seconds and the bevel heads are replaced within 45 seconds. A perfect bevel is achieved faster; on average 4 feet (1 metre) of 8-mm-deep metal can be beveled within 80 seconds.

Better working conditions

The beveling machines are lightweight and create the required bevel almost without vibrations. As the bevel heads cut through the metal, the chips are large and heavy, and immediately drop to the ground. No hazardous dust particles and/or combustion gases are released.

Contact us for more information

Find a store near you

Choose the concept that suits you best

The powerful, ergonomic Bevel Mate® concept is highly suitable for more heavy-duty machining and larger projects that require a lot of beveling. With Bevel Mate® you can make bevels in various angles from 15 to 60 degrees.
Learn more about the Bevel Mate® cutters and machines
The Bevel Mite® concept is compact and lightweight. Specially designed for quick rounding of smaller sheets, pipes and holes. With Bevel Mite® you can make beveled edges in various angles from 15 to 60 degrees.
Learn more about the Bevel Mite® cutters and machines

The assortment bevel heads for metal

Beveltools has solid carbide cutters for a wide range of metals. Every type of Beveltools bevel heads has its own characteristics, making them more or less suitable for certain types of metal. Simply change the bevel head to create a different angle or radius, or to bevel a different type of metal. Changing the bevel head only takes a matter of seconds.

For the best end result, it is highly important to choose the right bevel head that is the most suitable for the job at hand. The diagram is a guide for making the right choice.


Available in 3 types

Beveltools 3.0 is here!Download our free catalogue

We introduced  a complete new range of tools, called Beveltools 3.0

Until we finished the new website you can find them in the new catalogue that you can download here , using the download buttons on the pages or go to the download section in the menu on top of each page.